Job Responsibilities:

1. Mechanical structure of non-standard automation equipment, selection design of mechanical parts, and design of gas circuit;

2. Production of 3D digital model and engineering drawing, purchase order, gas circuit diagram, lineup (sequence diagram);

3. Feasibility simulation and mechanical analysis of mechanical structure;

4. Cooperate with electrical engineers to complete equipment design, optimization and improvement, technical guidance and coordination in the process of production site debugging. Assist the project manager to complete the design work and debugging on time;

5. Support the program department, formulate programs and quotations according to customer requirements;

Qualifications:

1. Mechanical design and automation related majors, college degree or above;

2. About 3 years of relevant work experience;

3. Proficient in using solidworks design software;

4. Basic communication skills, coordination skills, team spirit;

Job Responsibilities:

1. Electrical design, commissioning and field operation of non-standard automation equipment;

2. Estimate the design cost and manufacturing cost of the electrical part of non-standard equipment, and be responsible for the purchased components used in the selection of equipment;

3. Drawing of electrical drawings of non-standard equipment;

4. Cooperate with mechanical engineers to complete the design and transformation, and can provide technical guidance, coordination and communication on site.

Recruitment requirements

1. Major in electrical and automation, college degree or above;

2. 3-8 years of relevant design work experience (non-standard equipment electrical related);

3. Familiar with PLC programming of any mainstream brand (Siemens, AB, etc.), and have used Siemens series;

4. Familiar with EPLAN electrical drawing software;

5. Experience in non-standard equipment is preferred;

6. Have good self-learning ability and work attitude, and can work independently under certain pressure;

Job Responsibilities:

1. Development of PLC and HMI programs for new energy battery production lines;

2. Factory and customer on-site debugging;

3. Electrical coordination, progress control, installation guidance and customer training on customer site;

4. Writing relevant electrical documents;

5. Other matters assigned by the leader;

Qualifications:

1. College degree or above in automation, mechatronics or related majors, less than 45 years old;

2. At least 2 years of experience in PLC programming and debugging of industrial automation equipment, more than 1 year of work experience in large-scale line debugging, experience in debugging new energy battery production lines is preferred, familiar with electrical standards in the automotive industry is preferred, and 5 years are especially welcome Join the above work experience;

3. At least proficient in or familiar with programming and debugging of one of Siemens 1500, Rockwell PLC and HMI, and able to work independently;

4. Experience in E-Plan application is preferred;

5. Have good communication skills in both Chinese and English;

6. Able to work well under pressure and perform tasks well. Able to adapt to the requirements of frequent business trips; have a high sense of responsibility and professionalism.

job description:

1. Responsible for the selection of robots, robot tools and robot peripheral equipment for the company's related projects;

2. Cooperate with mechanical or simulation engineers to complete related process planning, robot accessibility, beat evaluation, etc.;

3. Responsible for robot configuration, programming and debugging, programming teaching, etc.;

4. Cooperate with electrical engineers and visual engineers to complete signal interaction, function realization, joint debugging and testing, etc.;

5. On-site technical support, training, acceptance, and progress control for customers;

6. The establishment, arrangement and output of work documents for the robot part of the company's related projects;

Job Requirements:

1. College degree or above in automation, electrical, mechatronics or related majors, less than 40 years old;

2. At least 2 years of robot debugging experience, at least proficient in 1-2 mainstream robots (FANUC, KUKA, ABB, etc.) robot configuration, teaching, debugging, able to work independently;

3. Those who have work experience in line debugging of engineering companies are preferred, and those who have established robot standard programs are preferred;

4. Experience in laser welding debugging is preferred;

5. Good communication skills and teamwork skills. Able to adapt to the requirements of frequent business trips.

Work content:

1. Participate in the electrical installation of new projects and renovation projects and assist in mechanical installation to ensure project quality;

2. Able to troubleshoot on-site, timely feedback information, to ensure smooth project installation and production;

3. Cooperate with engineers to solve problems in the electrical installation process of the project;

4. Other tasks assigned by the leader.

Qualifications:

1. High school education or technical school graduation;

More than 2.3 years of experience in installation, wiring, and debugging;

3. Must hold an electrician employment certificate;

4. It is necessary to understand the wiring diagram and independent wiring, and it is better to be able to understand the schematic diagram;

5. Familiar with electrical installation standards including electrical safety;

6. Able to adapt to long-term business trips, strong hands-on ability, hard-working, able to work overtime according to work arrangements.

Work content:

1. Participate in the installation of machinery and equipment for new projects and renovation projects to ensure project quality;

2. Able to troubleshoot on-site, timely feedback information, to ensure smooth project installation and production;

3. Cooperate with engineers to solve problems during the installation of mechanical equipment on the project;

4. Other tasks assigned by the leader.

Qualifications:

1. High school education or technical school graduation;

2. More than 3 years of relevant work experience, and those with on-site assembly experience such as automation equipment, tooling fixtures, assembly production lines, etc. are preferred;

3. Understand the principle of mechanical assembly, assembly fitter technology, electrical common sense, etc.;

4. Familiar with mechanical assembly drawings;

job responsibilities

1. According to customer bidding requirements, make technical bidding proposal;

2. According to the inquiry to the supplier, make the cost budget quotation table, and maintain the quotation database;

3. Summarize and refine according to the executed projects, and apply them to the new customer project plan;

Qualifications

1. Mechanical design and automation related majors, bachelor degree or above;

More than 2.3 years experience in mechanical design or scheme design

3.Basically master the use of 2D and 3D design software;

3. Good language skills, communication skills, coordination skills, service awareness and team spirit;

4. Good personal reputation, active work, cheerful personality, strong anti-stress ability, and competitive spirit;

Job Responsibilities:

1. According to the project parts drawing size (standard) and the company's incoming material inspection standards, do a good job in the incoming material inspection submitted by the warehouse, complete the filling of the material delivery note and inspection report, and record the incoming material inspection details, incoming material exceptions and other reports Work.

2. According to the requirements of the project team, according to the project parts drawing size (standard) and the company's material inspection standards, complete the requirements for material inspection at the supplier, complete the on-site inspection report, and actively feedback the inspection results and related materials to the project team. .

3. For the abnormal situation of incoming materials, deal with it in accordance with the company's relevant process system, and actively feedback the abnormal problems and the corresponding company technical specifications and requirements to the supplier.

4. Cooperate with the project team to supervise the supplier's progress, quality, capability and other issues in the project stage. To promote the completion of the supplier's various items on time and quality.

5. Responsible for publicizing and implementing the company's technical processing specifications and inspection and testing specifications to suppliers in daily work.

6. Use the company's various measuring instruments in a reasonable and compliant manner, and cooperate with the project department to conduct inspections and inspections of special dimensions or product debugging.

Qualifications:

1. Technical secondary school or above;

2. More than three years of work experience in non-standard automation or automotive industry;

3. Familiar with the knowledge of quality management system and the application of quality management tools;

4. Understand the relevant knowledge of products and parts, be familiar with the relevant processing specifications and inspection and testing specifications of machined parts, be able to independently complete the material inspection and abnormal handling, and have the awareness and ability to promote the improvement of suppliers;

5. If you have the proficiency in CMM operation and qualification, it can be preferred

6. Strong hands-on ability, hard-working.

7. Basic communication skills, coordination skills, team spirit;

8. Serious and responsible work, rigorous and meticulous, practical, realistic, with a high sense of responsibility and professionalism.

Job Responsibilities:

1. Responsible for the technical support of the department's machine vision project;

2. Application layer development of visual products

3. The work content includes preliminary technical exchange, project testing and integration, and project on-site technical support

Qualifications:

1. Major in automation, electromechanical, computer and other related majors, bachelor degree or above;

2. Familiar with visual processing related software;

3. Understand the principle of visual system;

4. Those who can use C++ or C# software***;

5. Have good communication, coordination and teamwork spirit

Work content:

1. Communicate with customers to understand project requirements, make technical plans and selection lists according to requirements, and calculate costs

2. Manufacturing Execution System (MES) software development and on-site debugging

3. Standardization of Manufacturing Execution System (MES) software and processes

4. Management and collaboration between internal teams/customers/suppliers

5. Related documentation, maintenance and technical support

job requirements:

1. More than 1 year experience in manufacturing MES system development

2. Proficient in using .NET (C#) for project development

3. Have a solid foundation of front-end technology such as Html/CSS/JavaScript/Ajax&jQuery

4. Proficiency in using at least one mainstream database such as SQLServer/Oracle/MySQL

5. Proficient in .NET architecture components, including ASP.NET, WebServices, etc.

6. Master object-oriented programming, agile software development, design patterns and other software engineering knowledge

7. Understand the mainstream MES platform in the market, and those who can use the platform for secondary development are preferred

8. Good communication skills, rigorous and meticulous work, strong executive ability and teamwork spirit